29
DAB Display Modes
Every time you press INFO, the information is display and will cycle through the following
display modes:
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that
the broadcaster may include with their transmissions.
The message usually includes information, such as
programme details etc.
Signal Strength
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar
will be from left to right.
Programme Type
This describes the style or genre of the programme
that is being broadcast.
Ensemble Name
A multiplex is a collection of radio stations that are
bundled and transmitted on one frequency. There
are national and local multiplexes. Local ones contain
stations that are specic to that area.
DAB – unlike normal radio, groups together several radio
stations and transmits them on one frequency.
Channel Number
DAB digital radio can be broadcast on a wide number
of frequencies. A number of channels have been
allocated (5A-13F).
Frequency
The frequency of the present station will be
displayed.
Error in Signal
The error is shown as a number. If the number is 0,
it means the signal received is error free and the
signal strength is strong. If the error rate is high, it is
recommended to re-position the radio aerial or
re-position the unit.
Audio Mode
Display shows Stereo or Mono of the current station.
Bit Rate
The display will show the digital audio bit rate being
received.
Mode
The display will show DAB or FM mode.
Clock and Date
The broadcaster (Radio station) provides the clock
and date information automatically so there is no
need to manually set this information.
Ensemble Name
Channel Number
Frequency
Error in Signal
Audio Mode
Bit Rate
Mode
Clock
Date
DLS
Programme Type
Signal Strength
TH-WL701B_703B_IB_140418_Annie.indd 29 18/4/14 7:14 pm
To Next Page
Loading...
Need help?
General
