To Next Page

To Previous Page

Bluetooth® Operation

Pairing the unit with a Bluetooth® device to listen to music:

First time pairing

1. During On mode, press SOURCE on the unit repeatedly or press PAIR on the remote

control to select Bluetooth® mode. The display will show “BT“. Then “PAIRING“ will ash

in the display.

2. Activate your Bluetooth® device and select the search mode. “TH-WL707X” will appear

on your Bluetooth® device list.

3. Select “TH-WL707X” and enter “0000” for the password if necessary. After pairing, the

display will show “PAIRED“.

• Press and hold SOURCE on the unit or PAIR on the remote control to clear all pairing

setting. The unit will enter pairing mode, and PAIRING will ash in the display. Follow

step 2-3 to pair your Bluetooth® device.

Bluetooth® device already in the connection memory

1. After entering the Bluetooth® mode, the display will show “BT“ and then “BT READY“.

2. The unit will automatically reconnect with the Bluetooth® device. After pairing, the

display will show “PAIRED“.

If your Bluetooth® device supports A2DP, play music via your device.

To disconnect the Bluetooth® function, switch to another function on the unit or disable the

function from your Bluetooth® device. You may also press and hold SOURCE on the unit or

PAIR on the remote control to clear all pairing setting. “PAIRING“ will ash in the display

and the unit is now ready for pairing. Follow step 2-3 in “First time pairing“ above to pair

your Bluetooth® device.

• The operational range between the unit and the device is approximately 6 metres.

• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.

• Compatibility with all Bluetooth® devices is not guaranteed.

• Any obstacle between the device and the unit can reduce operational range.

• Keep this player away from other electronic devices that may cause interference.

• The player will also be disconnected when your device is moved beyond the operational range.

NFC (Near Field Communication) Operation

Pair your NFC-enabled mobile device directly with this unit by just a single tap.

1. Activate NFC on your mobile device.

2. Tap the mobile device on the icon of the unit. Your unit will switch to Bluetooth®

mode automatically. The display will show BT. The unit will enter pairing mode, and

PAIRING will ash in the display.

3. Operate your mobile device for playback features.

4. To disconnect, tap the mobile device on the icon of the unit to disconnect or disable

Bluetooth® from your mobile device.

• The NFC function only works with mobile devices that support NFC technology.

• You may need to remove your mobile devices case to connect using NFC.

JVC TH-WL707H User Manual

Questions and Answers: