Memo
When the [AUX FUNCTION] switch is set to "OUT:ALARM" or
"OUT:B&W", [IN POLARITY] does not work even if it is set.
OUT POLARITY
Sets the polarity of the output alarm signal.
[Setting values : MAKE (short), BREAK (open) (Default value: MAKE)
Memo
When the [AUX FUNCTION] switch is set to "IN:ALARM" or "IN:D/N",
[OUT POLARITY] does not work even if it is set.
Manual Adjustment of White Balance
White balance of this camera can be set to adjust automatically according to the
subject.
When the automatic adjustment results in a "reddish screen" for example, adjust
the white balance manually.
1
Set the [WHITE BALANCE] item on the menu screen to "AWC"
and press the [SET] button.
2
Press the [J/K] button to select the hue ([R GAIN]/[B GAIN]).
3
Press the [H/I] button to change the hue setting.
The hue changes according to the selected value.
4
Press the [MENU] button to exit the manual adjustment of white
balance.
Memo
The settings of [R GAIN] and [B GAIN] work during color operation. To
adjust the setting value, do so during color operation.
.
BASIC MENU
WHITE BALANCE
AGC
SENSE UP
CAMERA TITLE
ADVANCED MENU..
ATW-W
HIGH
OFF
- - -
WHITE BALANCE CONTROL
AWC SET
R GAIN
B GAIN
160
160
[BASIC MENU] Screen
[WHITE BALANCE CONTROL] Screen
Setting Examples
14
To Next Page
Loading...
Need help?
General
