14
SPECIFICATIONS
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* E. & O. E. Design and specifications subject to change without notice.
MODEL TM-2100PN
Type Colour video monitor
Colour system PAL, NTSC (3.58)
Picture tube 54 cm measured diagonally,
flat-square type,
90° deflection, in-line gun,
vertical line trio type
(phosphor stripe pitch 0.69 mm)
Effective screen size Width 406.4 mm
Height 304.8 mm
Diagonal 508 mm
Scanning frequency H : 15.734 kHz (NTSC), 15.625 kHz (PAL)
V : 59.94 Hz (NTSC), 50 Hz (PAL)
Horizontal resolution 450 TV lines or more
(Y/C input mode)
Input terminals VIDEO A Composite video: 1 line, BNC connector x 2,
1 V(p-p), 75 Ω negative sync
(bridge connection possible, auto termination)
VIDEO B Composite video: 1 line, BNC connector x 2,
1 V(p-p), 75 Ω negative sync
(bridge connection possible, auto termination)
Y/C-separated: 1 line, mini-DIN 4-pin connector x 2
Y: 1.0 V(p-p), 75 Ω
C: 0.286 V(p-p), 75 Ω (NTSC), 0.3 V(p-p), 75 Ω (PAL)
(bridge connection possible, auto termination)
AUDIO A 1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance
(bridge connection possible)
AUDIO B 1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance
(bridge connection possible)
REMOTE 1 line, RCA pin x 2 (bridge connection possible)
Audio power output 1 W (monaural)
Built-in speaker 8 cm round x 1, impedance of 8 Ω
Environmental conditions Operation temperature: 0 – 40 °C
Operation humidity: 20 – 80% (non-condensing)
Power requirements 230 V AC, 50 Hz/ 60 Hz
Power consumption 0.72A (230 V AC)
Dimensions Width 476 mm
Height 407.5 mm
Depth 492 mm
Weight 28.5 kg
Accessory AC power cord (2 m) x 1
LCT0053-002A-H (EN) 02.07.30, 2:46 PM14
To Next Page
Loading...
