JVC TM-A101G/E - Page 22

No.51921
TM-A101G
22
CONTROL BLOCK
(This is a fixed value. Don’t adjust it.)
SERVICE Number CONTENTS INITIAL SETTING VALUE
C01
MODEL
001
C02 UPPER 063
C03
BRIGHT POINT
LOWER 063
C04 UPPER 040
C05
CONTRAST POINT
LOWER 035
C06 UPPER 000
C07
CHROMA POINT
LOWER 030
C08 UPPER 050
C09
PHASE POINT
LOWER 050
C10 OSD HORIZONTAL POSITION 012
C11 OSD VERTICAL FREQUENCY (50Hz) 005
C12 OSD VERTICAL FREQUENCY (60Hz) 000
C13 VERTICAL DELAY (NTSC) 001
C14 VERTICAL DELAY (PAL) 001
C15
VERTICAL DELAY (SECAM) 004
C16
VERTICAL DELAY (BLACK AND WHITE) 001
C17
S DELAY (NTSC) 001
C18
S DELAY (PAL) 001
C19 S DELAY (SECAM) 001
C20 S DELAY (BLACK AND WHITE) 001
C21 BRIGHT (VERTICAL) 120
C22 SHARP (CENTER VALUE) 012
C23 V-GUARD 001
C24 HOUR METER 001
C25 AFC MODE 000
C26 BURST (NTSC / PAL) 000
C27 BURST (SECAM) 000
C28 COLOUR SYSTEM 000
C29 REMOCON 000
C30 S-FIELD 001
C31 SDC ATT 000
C32 DEMP F0 000
C33 V. ID. SW 000
C34 S. KILL 000
C35 BELL. F0 000
C36 ABL. GAIN 003
C37 ABL. POINT 001
C38 TRAP SW (NTSC) 001
C39 TRAP SW (PAL) 000
C40 TRAP Q (NTSC) 001