No. 51921
TM-A101G
29
Item Test equipment Test points
Adjustment
locations
Adjustment procedure
V. Size
Adjustment
Signal generator
(Crosshatch pattern)
D02 (V.SIZE)
[SERVICE MENU]
9. Input the crosshatch signal.
10. Select D02 item, and adjust it to the vertical scan
size to
95%
.
V. SIDE
PINCUSHION
V. LINEARITY
Adjustment
Signal generator
(Crosshatch pattern)
D03 (V. S-CR)
D05 (V. LIN)
[SERVICE MENU]
z
Should not adjustment except for in case of under
the condition that remarkably bad about vertical
linearity,
11. Input the crosshatch pattern signal.
12. Adjust the D03 to the all square in the
crosshatch screen become true square.
13. Adjust the D05 to the all vertical lines become
straight.
If necessary, repeat the above steps (DEFLECTION
adjustment) many times. And improve the
adjustment level.
Picture
size
100%
100%
Screen
size
95%
95%
Side pincushion (Reel)
Vertical LinearitySide Pincushion (Barrel)
To Next Page
Loading...
