JVC UX-A5 - Timer Playback Functionality Details; Volume Setting and Fade-in in Timer Playback

UX-A5 A/B/E/G/GI/EN
Timer playback
® Timer playback of tapes, broadcasts and CDs is
possible.
Operations
@ Set the POWER switch to ON. ;
@ Set the timer start and stop times, set the timer
playback mode, then set the volume, in this order.
Source sound
CD play
Tape playback
Broadcast
© Timer playback of a CD is possible in programmed
order. (See page 30.)
@ The volume can be set to 5 different levels.
© Tune to the required frequency when the timer playback
of a broadcast is to be performed.
@ Switch the power off. (The power is STANDBY and indi-
Cator lights.)
© Timer playback will start at the timer start time and the
power will be switched off at the timer stop time.
The unit remains in the same timer mode even after the
power is switched off and the same timer function will be
repeated at the same time on the following day.
® Volume setting and fade-in operation
{AG} BWNIOA, >
When the volume is set to level 1.
When the volume is set to level 3.
When the volume is set to level 2.
Timer mode Operations
Load a disc.
Load a cassette tape.
When the volume is set to level 5.
When the volume is set to level 4.
Timer operation time
xxi