14
3 Start the measurement.
A test tone comes out of the speakers.
4 Memorize the measurements.
Each time you hear a test tone, press the button. You
hear 5 test tones from the speakers.
5 Select a preset number from 1 to 3 to store the
equalization pattern.
After finishing the measurement, an appropriate
equalization pattern is created and it is shown in white
on the TV screen.
• The last equalization pattern stored into the selected
preset number is shown in green.
• To return to the measurement, select “EXIT” on the
TV screen then press ENTER/SET.
Canceled
To adjust the tone
Remote
ONLY
You can adjust the bass and treble level from –3 to +3.
To adjust the bass
To adjust the treble
Creating a Soothing Tone for Your Ear
—MY SOUND
INFO
Remote
ONLY
The sound tone you can hear is different in individuals.
MY SOUND creates an appropriate equalization pattern
for your listening condition.
To set up MY SOUND
1 While playing...
2 Enter MY SOUND setup.
“MYSOUND” and “MEASURE” appear alternately on
the display.
Canceled
3
EXIT
1
2
PRESET
MY SOUND
SELECT PRESET 1 TO 3 AND PRESS
THE ENTER KEY TO STORE.
MY SOUND
MEASURING... DATA 1 2 3 4 5
PRESS THE ENTER KEY IMMEDIATELY
AFTER YOU HEAR THE TEST TONE.
ENTER EXIT
On the TV
On the TV
Signal level
Continued on the next page
MY SOUND
SELECT START AND PRESS THE ENTER KEY
TO START MEASUREMENT.
START EXIT
On the TV
EN_UX-G950V[B]5.indb 14EN_UX-G950V[B]5.indb 14 08.4.18 5:32:11 PM08.4.18 5:32:11 PM
To Next Page
Loading...
Need help?
General
