1-7
UX-P3
Remove the six screws A on the back of the body.
Remove the two screws B on the side of the body.
Pull both sides of the metal cover outward and lift the
rear part of the cover.
1.
2.
3.
Disassembly method
<Main body>
Removing the metal cover
(See Fig.1 and 2)
Prior to performing the following procedure, remove
the metal cover.
Remove the two screws C on the back of the body.
1.
Removing the rear cover (See Fig.3)
Fig.1
Fig.2
Fig.3
A
A
A
A
A
Metal cover
Metal cover
B
2
C
Rear cover
Rear panel
C
To Next Page
Loading...
