1-10 (No.MB262)
3.1.4 Removing the cassette mechanism assembly
(See Fig.11)
• Prior to performing the following procedures, remove the side
panels L/R, front panel assembly and top cover assembly.
(1) From the bottom side of the top cover assembly, discon-
nect the card wires from the connectors (CN33
, CN34) on
the head amp. & mechanism control board.
(2) Remove the four screws E attaching the cassette mecha-
nism assembly and take out the cassette mechanism as-
sembly from the top cover assembly.
Fig.11
E
CN34
CN33
Cassette mechanism assembly
Head amp. & mechanism control board
Top cover assembly
Card wires
E
To Next Page
Loading...
Need help?
General
