EasyManuals Logo

JVC XM-R70 User Manual

JVC XM-R70
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
9
Dividing Tracks (DIVIDE Function)
Use the unit to carry out this function.
1 In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “DIVIDE?” is dis-
played.
2 Press the SET button and then press the 6 button.
3 Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be di-
vided.
4 Press the SET button at the point where the track is to be divided.
The recording lasting for 4 seconds starting where the track was divided is repeatedly played for your refer-
ence.
Movement is possible within the POSITION-128 to +128 range (about 8 seconds before or after the position).
To move the point, turn the JOG dial while listening the music.
5 Press the EDIT/ENTER button.
“COMPLETE” and “TOC” appear, indicating successful recording.
The selected track is divided into two tracks and the track number will increase by 1.
When you turn off the power by pressing the 7/CHARGE button, “UTOC Writing” will be displayed and the
edited contents are written. (The “TOC” indicator goes out.)
To cancel the operation, press the 7/CHARGE button in step 1 through 4 until the display returns to the original
display.
Joining Tracks (JOIN Function)
Use the unit to carry out this function.
1 In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “JOIN?” is dis-
played.
2 Press the SET button.
You can listen to the track by pressing the 6 button. The selected track is repeatedly played.
3 Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be joined.
4 Press the SET button.
“PUSH ENTER” appears.
5 Press the EDIT/ENTER button.
“COMPLETE” and “TOC” appear, indicating successful recording.
The selected track and the previous track are joined and the track number is decreased by 1.
When you turn off the power by pressing the 7/CHARGE button, “UTOC Writing” will be displayed and the
edited contents are written. (The “TOC” indicator goes out.)
To cancel the operation, press the 7/CHARGE button in step 1 through 4 until the display returns to the original
display.
JOG dial
Selected track
Track to be divided
Playing time
JOG dial
Selected track
Track to be joined
XM-R70(B)_P9-16.p65 6/23/99, 3:08 PM9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC XM-R70 and is the answer not in the manual?

JVC XM-R70 Specifications

General IconGeneral
BrandJVC
ModelXM-R70
CategoryCD Player
LanguageEnglish

Related product manuals