10
1 In Stop mode, press the EDIT/ENTER
button and turn the JOG dial until
“ERASE?” is displayed.
2 Press the SET button.
• You can listen to the track by pressing the 6
button. The track to be erased is repeatedly
played.
3 Turn the JOG dial (or press the 4 or
¢ button) to select the track number to
be erased.
1 In Stop mode, press the EDIT/ENTER
button and turn the JOG dial until
“MOVE?” is displayed.
2 Press the SET button.
• You can listen to the track by pressing the 6
button. The track to be moved is repeatedly
played.
3 Turn the JOG dial (or press the 4 or
¢ button) to select the track number
to be moved.
4 Press the SET button.
5 Turn the JOG dial (or press the 4 or
¢ button) to select the destination to
which the track is to be moved.
• If you are playing back the MD, the destination
track is repeatedly played.
6 Press the SET button.
“PUSH ENTER” appears.
7 Press the EDIT/ENTER button.
“COMPLETE” and “TOC” appear, indicating suc-
cessful recording.
• When you turn off the power by pressing the 7/
CHARGE button, “UTOC Writing” will be displayed
and the edited contents are written. (The “TOC” indi-
cator goes out.)
To cancel the operation, press the 7/CHARGE button
in step 1 through 6 until the display returns to the origi-
nal display.
Moving Tracks (MOVE Function)
Use the unit to carry out this function.
Track to be moved
Destination track
JOG dial
Track to moved
Erasing Tracks (ERASE Function)
Use the unit to carry out this function.
JOG dial
Track to be erased
4 Press the SET button.
“ERASE OK? PUSH ENTER” appears.
5 Press the EDIT/ENTER button.
“COMPLETE” appears, indicating successful eras-
ing.
The selected track is erased and the track number
is decreased by 1.
• When you turn off the power by pressing the 7/
CHARGE button, “UTOC Writing” will be displayed
and the edited contents are written.
To cancel the operation, press the 7/CHARGE button
in step 1 through 4 until the display returns to the origi-
nal display.
Erasing All the Tracks (ALL ERASE Function)
Use the unit to carry out this function.
1 In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “ALL ERASE?”
is displayed.
2 Press the SET button.
“ERASE OK? PUSH ENTER” appears.
3 Press the EDIT/ENTER button.
“COMPLETE” appears, indicating successful erasing.
All the tracks in the MD are erased and “BLANK DISC” is displayed.
• When you turn off the power by pressing the 7/CHARGE button, “UTOC Writing” will be displayed and the
edited contents are written.
To cancel the operation, press the 7/CHARGE button in step 1 or 2.
XM-R70(B)_P9-16.p65 6/23/99, 3:08 PM10
To Next Page
Loading...
Need help?
General
