EasyManua.ls Logo

JVC XS-N3111PBA User Manual

JVC XS-N3111PBA
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ProductSpecification
Speaker
Output Power
3600mAh,3.7V
DC5V,1A
Power Input
40Hz~20KHz
Separation
Register your product at jvctv.com.au/warranty-registration
Dynamic Range
Distortion
Input Signal Source
Radio FM
SNR
87-108MHz
>75dB(AFR)
AUX Terminal,Bluetooth,USB,TF,FM
Bluetooth Version
Main Channel Frequency Response
5.0
40dB
90dB
1%
16W
8"X1+Tweeter 1"
Impedance(Ω)±20%
Battery Capacity
Bluetooth Speaker
XS-N3111PBA
Performance Parameters
Question and Answer IconNeed help?

Do you have a question about the JVC XS-N3111PBA and is the answer not in the manual?

JVC XS-N3111PBA Specifications

General IconGeneral
BrandJVC
ModelXS-N3111PBA
CategorySpeakers
LanguageEnglish

Summary

Performance Parameters

Charging the Speaker

Bluetooth Connection

Connect your device via Bluetooth for wireless audio streaming.

FM Radio Playback

Tune into FM stations and save your favorites for easy access.

USB/microSD/AUX Input

Play music from USB drives, microSD cards, or via AUX cable.

Microphone Input

Connect a microphone and adjust volume and echo settings.

True Wireless Stereo (TWS) Mode

Link two speakers for an enhanced stereo audio experience.

Important Safety Instructions

Product Overview

Microphone Input Jack

Connect a microphone to this port for vocal input.

Aux In Input Jack

Connect external audio devices using a 3.5mm audio cable.

Microphone Echo Control

Adjust the echo effect for the microphone input.

Microphone Volume Control

Control the volume level for the microphone input.

microSD (TF) Card Input Slot

Insert a microSD card to play audio files.

USB Device Input Slot

Connect USB drives for audio playback.

LED Display

Shows operational status and mode information.

Previous Song (Previous Station) or EQ

Navigate tracks or select equalizer presets.

Music Play/Pause or TWS

Control music playback or initiate TWS pairing.

Next Song/ Next Station or RPT

Skip to the next track or station, or set repeat mode.

Mode/Lights

Cycle through input modes or control LED lighting.

microUSB Charging Port

Connect the charging cable to power the speaker.

Charging Indicator LED

Indicates the charging status of the battery.

Power Switch/Volume Control

Turn the speaker on/off and adjust the volume.

Related product manuals