XV-521BK/523GD/525BK/421BK
1-7
Prior to performing the following procedure, remove
the top cover and the fitting.
Disconnect the card wire from connector CN703 on
the main board.
Turn over the body and remove the screw D
attaching the front panel assembly.
Release the five joints c on both sides and bottom of
the body and remove the front panel assembly
toward the front.
1.
2.
3.
Removing the front panel assembly
(See Fig.7 to 10)
The connector CN832 on the front
panel assembly and CN971 on the AC
jack board will be disconnected at the
same time.
ATTENTION:
Fig.7
Fig.8
Fig.9
Fig.10
Main board
D
DC mechanism assembly
AC jack board
Front panel assembly
CN703
CN971
Joint c Joint c
Front panel assembly
Joint c
Front panel assembly
Joint c
To Next Page
Loading...
Need help?
General
