40
Playing back DVDs/CDs
List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal
NOTE
* Copyright-protected DVD AUDIOs do not output signals.
• Among DVD VIDEOs without copyright protection, there may be some DVD VIDEOs that output a 20 or 24 bit
signal through the digital audio output terminals.
• To produce the sound from the loaded disc in the DVD player, select “PCM ONLY”. Otherwise the receiver does
not detect the signal and no sound is produced. (The initial setting is “PCM ONLY”.)
Playback disc
DIGITAL AUDIO OUTPUT preference
PCM ONLY DOLBY DIGITAL/PCM STREAM/PCM
48 kHz, 16/20/24 bit
Linear PCM DVD VIDEO
96 kHz linear PCM DVD VIDEO
48 kHz, 16 bit stereo linear PCM
48/96/192 kHz,
16/20/24 bit linear PCM DVD AUDIO*
48 kHz, 16 bit stereo linear PCM
44.1/88.2/176.4 kHz,
16/20/24 bit linear PCM DVD AUDIO*
44.1 kHz, 16 bit stereo linear PCM
DTS DVD VIDEO/DVD AUDIO* 48 kHz, 16 bit stereo linear PCM DTS bit stream
DOLBY DIGITAL DVD VIDEO/DVD
AUDIO*
48 kHz, 16 bit stereo linear
PCM
DOLBY DIGITAL bit stream
VCD/SVCD/CD
44.1 kHz, 16 bit stereo linear PCM/48 kHz, 16 bit linear PCM
DTS CD 44.1 kHz, 16 bit linear PCM
DTS bit stream
MP3/WMA/DivX disc 32/44.1/48 kHz, 16 bit linear PCM
For the locations of the remote
control buttons, refer to page 38.
EXA10[J_C_UJ]-05.fm Page 40 Tuesday, September 6, 2005 6:07 PM
To Next Page
Loading...
Need help?
General
