Preliminary knowledge
13
Preliminary
knowledge
English
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
• Pressing any button on the unit or the remote control
unit will release the screen saver function and return to
the previous display.
• You can select one of several screen saver modes
available (see page 56).
• The screen saver function is not activated during
Audio CD playback or after stopping Audio CD
playback.
To prevent the monitor from burning out [SCREEN SAVER]
DVD/Super VCD/Video CD/CD PLAYER
On-screen guide icons
During DVD VIDEO playback, you may see icons displayed over the picture. These have
the following meanings.
: Displayed at the beginning of a scene recorded from multiple angles. (See page 36.)
: Displayed at the beginning of a scene recorded with multiple audio languages.
(See page 38.)
: Displayed at the beginning of a scene recorded with multiple subtitle languages.
(See page 37.)
You can set the unit not to display on-screen icons above via the preference settings
described on page 56.
About invalid operation icon
When you press a button, if the unit does not accept its operation,
appears on your
television screen. Operations are occasionally unacceptable even if is not displayed.
Note that some operations may not be accepted. For example, some discs may not allow
rapid advance/reverse or slow-motion playback.
P.06-15-eng.fm Page 13 Friday, July 19, 2002 8:44 PM
To Next Page
Loading...
Need help?
General
