JVC XV-M565BK Service Manual

XV-M565BK/M567GD
1-7
Prior to performing the following procedure, remove
the top cover.
Remove the eleven screws D attaching the rear
panel on the back of the body and detach the rear
panel.
1.
Removing the Rear panel (See Fig.6)
Prior to performing the following procedure, remove
the top cover.
The DVD changer mechanism assembly can be
removed even if the front panel assembly is
attached.
Remove the four screws E attaching the DVD
changer mechanism assembly cover and detach the
shield case at an angle.
Disconnect the 9pin harness from connector CN961
on the power supply board.
Disconnect the card wire from connector CN601 on
the video board.
Disconnect the card wires from connector CN701
and CN702 on the system control board.
Remove the four screws F attaching the DVD
changer mechanism assembly. Pull up the DVD
changer mechanism assembly at an angle from the
front panel assembly.
1.
2.
3.
4.
5.
Removing the DVD changer mechanism assembly
(See Fig.7 and 8)
Joints b
Front panel assembly
Fig.4
Fig.6
Fig.7
Fig.8
Fig.5
D
D
D
Rear panel
E
E
E
E
Shield case
F
F
F
F
DVD changer mechanism assembly
Video board
Power supply board
System control
board
CN701
CN601
CN961
CN702

JVC XV-M565BK Specifications

General

Brand	JVC
Model	XV-M565BK
Category	DVD Player
Language	English