Kommander-KA
User Guide
20
K-framework3
the dedicated K-framework3 software available for PC and MAC
on K-array website.
The K-framework3 is the managing and
control software dedicated to professionals
and operators looking for a powerful tool for
designing and managing a large number of units
in demanding applications.
The K-framework3 operates in three modes:
•
simulations;
•
components into the workspace or build from scratch
a PA system composed of active loudspeakers and
control of the system;
•
system during the tuning session and control its
behavior in live events.
The K-framework3 allows you to start designing the PA system
when the devices are available, or import from scratch in the
on the network. In both cases, in order to discover and sync the
active devices, both the PC or Mac running the K-framework3
The network shall comprise:
• single PC or MAC, running the K-framework3 software with
•
•
•
A DHCP server is highly recommended even if the device units
is not available, every device will self assign an IP address in the
K-framework3
WINDOWS and OSX software
with DHCP server
PC or MAC
K-framework3
K
K
K
Toolbar
Workspace
Menu bar
To Next Page
Loading...
