FREQUENTLY ASKED QUESTIONS
What are the features required for the Bluetooth
®
product to
work? A smartphone or tablet running Android 4.3 or greater with
Bluetooth Smart 4.0 or greater. An Apple iPhone or iPad running
iOS 9.0 or greater with Bluetooth Smart 4.0 or greater.
Why does my station not start? On each station, you must enter a
duration and assigned it to a program (A or B or C). If several stations
are assigned to the same program, they will start one after the other.
Why does my Program B not start? If the start time of Program A
is the same time entered in Program B, the two programs will be
executed one after the other in the order A and then B.
What is the output P? You can connect a master valve or a pump
on the P output. The output will automatically start 2 seconds before
each station and during the watering of each station.
What are the S outputs (Yellow Wires) of the programmer?
You can connect a Rain Sensor on the S outputs by cutting and
stripping the yellow wire.
How does the rain sensor work? When the sensor is connected
to the yellow wire (see wiring step for each model), it affects all 3
programs. If it rains and the rainsensor is active, programs A or B or
C will not start. It is necessary to wait until the sensor has reset before
irrigation will restart. Manual control «All stations» is not affected by
the rain sensor. You can manually operate the system even if the rain
sensor is activated.
To Next Page
Loading...
Need help?
General
