Kaba Peaks Preferred

Section 2 - 25
Product Information
uncombinated: combinated:
8840-xx-1006 8840-xx-1206 140, 6-pin
8850-xx-1006 8850-xx-1206 150, 6-pin
8850-xx-1007 8850-xx-1207 150, 7-pin
3840-xx-1006 3840-xx-1206 140, 6-pin
3850-xx-1006 3850-xx-1206 150, 6-pin
3850-xx-1007 3850-xx-1207 150, 7-pin
6-pin 140
uncombinated: combinated:
8144-xx-1006 8144-xx-1206 140, 6-pin
6140-xx-1006 6140-xx-1206 140, 6-pin
• brass plug
• brass shell and control sleeve
•
capped pin chambers
• individual chambers may be emptied with ejector tool
•
140 capping block / press required
• face of plug is key stop for longer core life
• retrofits Arrow, Best, Falcon, KSP, or Lockwood small format interchangeable cores prep
Uses:
3800-00-4221 individual caps
3425-34-4002 C-ring plug retainer
For 6-pin core in 7-pin housing,
use spacer 3800-00-3007
• brass plug
• alloy shell and control sleeve with patented plating and coating
• spring cover retains pins and springs
• 6840-00-3540 staking fixture and 6440-00-4001 staking tool required
• face of plug is key stop for longer core life
• retrofits Arrow, Best, Falcon, KSP or Lockwood small format interchangeable cores prep
Uses:
6800-00-2006 6-pin, or 6800-00-2007
7-pin spring covers
3425-34-4002 C-ring plug retainer
For 6-pin core in 7-pin housing,
use spacer 3800-00-3007
uncombinated: combinated:
8940-xx-1006 8940-xx-1206 140, 6-pin
8950-xx-1006 8950-xx-1206 150, 6-pin
8950-xx-1007 8950-xx-1207 150, 7-pin
6840-xx-1006 6840-xx-1206 140, 6-pin
6850-xx-1006 6850-xx-1206 150, 6-pin
6850-xx-1007 6850-xx-1207 150, 7-pin
• brass plug
• alloy shell and control sleeve with patented plating and coating
• spring cover retains pins and springs
• 6840-00-3540 staking fixture and 6440-00-4001 staking tool required
• face of plug is key stop for longer core life
• no restricted control combinations
• This product uses a large diameter plug.
J series bottom pins required for A2 system pinning.
K series bottom pins required for A4 system pinning.
Uses:
3425-00-2006 mortise/rim spring cover
6140-00-4002 C-ring plug retainer
6-pin 140 &
6 or 7-pin 150
Small Format Interchangeable Cores (Spring Loaded)—8900/6800 Series
Large Format Interchangeable Cores for Corbin Russwin—8144/6140 Series
Small Format Interchangeable Cores (Capped)—8800/3800 Series
6-pin 140 &
6 or 7-pin 150