What to do if the Kaba SIMPLEX 5000 CYLINDRICAL Door locks outside lever/knob always retracts the latch after pressing “ENTER”?
If the outside lever/knob of your Kaba Door lock always retracts the latch after depressing and releasing the “ENTER” button only, it could be because the lock is in “ZERO” combination. Follow the procedure for Changing Combinations, but omit the first two steps (do not enter the existing combination).
What to do if Kaba SIMPLEX 5000 CYLINDRICAL outside lever/knob retracts the latch after depressing the “ENTER” button?
If the outside lever/knob of your Kaba Door lock retracts the latch after depressing and releasing the “ENTER” button only, it may be because the activation cam has flipped over during a lost combination procedure. Remove the outside housing from the base, then remove the chamber and flip the activation cam back to its correct position.
General| Access Method | Keypad |
|---|---|
| Finish | Satin Chrome |
| Handing | Non-handed |
| Construction | Heavy-duty |
| Door Thickness | 1-3/8" to 2-1/4" |
| Backset | 2-3/4" |
| Material | Metal |
| Compliance | ADA Compliant |
Steps to verify the lock functions correctly after installation.
Step-by-step instructions for changing the lock's combination.
Specific steps for changing the combination from the interior side of the lock.
Steps to reset a forgotten or lost lock combination.
Detailed steps to recover or reset the existing lock combination.
Procedures to clear the current combination and set a new one.
A table listing symptoms, causes, and remedies for lock malfunctions.
To Next Page