Kaba ILCO E-790 Series User Manual

ILCO Generation E-760 Series
INSTALLATION GUIDE
ILCO Generation E-760/770/790 Series
Retrofit Installation Guide - Unican System 700 to E-760/770/790
PK2915-T
ILCO 770 Series ILCO 790 Series

Kaba ILCO E-790 Series Specifications

General

Brand	Kaba
Model	ILCO E-790 Series
Category	Door locks
Language	English

Summary

Introduction and Disclaimers

Warnings and Cautions

Highlights important safety precautions and operational warnings before proceeding with installation.

Install Housing and Inside Trim Assembly

Install Outside Housing

Guidance on attaching the outside housing, including spindle and thumbturn insertion and outdoor gasket use.

Install Inside Trim Assembly

Steps for assembling the inside trim, including tension spring, compression spring, and mounting screws.

Install Outside Lever

Install Batteries

Instructions for inserting the battery holder and securing it, with notes on troubleshooting buzzing or continuous LED lights.

Test Lock Operation

Test Electronics and Card Reader

Tests lock response to various keycards (Test, Grand Master, Emergency).

Program the Lock

Operating Electronic Override

Electronic Override Using FDU

Details how to open the lock using the Front Desk Unit (FDU) and communication cable.

Install Key-in-Knob Mechanical Override

Prepare Outside Housing for Lever Handle

Prepare Lever Handle and Cylinder

Attach Lever Handle to Lock Housing

Detailed steps for attaching the lever handle to the housing, emphasizing correct key and recess entry positions.

Attach Lever Handle to Lock

Steps for fitting and securing the lever handle to the drive tube, including troubleshooting lever catch and alignment.

Verify Lever Handle Attachment

Test Mechanical Override Function

Verifies the mechanical override function by testing drive hub rotation with and without the key.

Test Mechanical Override (Continued)

Recodable Cylinder with 3 Keys