Kaba ILCO E-770 Series User Manual

ILCO Generation E-760 Series
INSTALLATION GUIDE
ILCO Generation E-760/770/790 Series
Retrofit Installation Guide - Unican System 700 to E-760/770/790
PK2915-T
ILCO 770 Series ILCO 790 Series

Kaba ILCO E-770 Series Specifications

General

Strike	Standard ANSI Strike
Audit Trail	No
Certification	ANSI/BHMA Grade 2
Strike Plate	Included
Power Supply	4 AA batteries
Access Method	Keypad, Key Override
Backset	2-3/4"
Latchbolt	1" throw
Keyway	Schlage
Handing	Reversible, fits all doors
Door Thickness	1-3/8" to 2" (35 mm to 51 mm)

Summary

Drill New Mounting Holes in Door

Install the E-760/770/790 Outside Housing and Inside Trim Assembly

Install the Outside Housing

Guides the installation of the external lock housing onto the door.

Install the Inside Trim Assembly

Details the assembly of the internal lock components.

Test the Operation of the E-760/770/790 Lock

Electronics and Card Reader Test

Tests the lock's electronic and card reading capabilities.

Program the E-760/770/790 Lock

Operating the Electronic Override

Electronic Override Using the FDU

Explains how to operate the lock via the Front Desk Unit (FDU).

Installing the Key-in-Knob Mechanical Override Model

Attach Lever Handle to Lock Housing

Instructs on how to attach the lever handle to the lock.

Attaching the Lever Handle to the Lock

Test Mechanical Override Function

Confirms the proper functioning of the mechanical override.

Test Mechanical Override Function (Continued)

Continues testing the mechanical override functionality.

How to Change Lock Cylinders

How to Change Lock Cylinders (Continued)

Recodable Cylinder with 3 Keys

Change Lock Combination from Key #1 to Key #2

Procedure to change the lock combination to key #2.

Change Lock Combination from Key #2 to Key #3

Procedure to change the lock combination to key #3.