Need help?Do you have a question about the Kaba SIMPLEX 3000 NARROW STILE and is the answer not in the manual?
General| Brand | Kaba |
|---|---|
| Model | SIMPLEX 3000 NARROW STILE |
| Category | Door locks |
| Language | English |
Details cylinder installation procedures, including removing interposer assembly and screws.
Instructions for installing the mortise cylinder and aligning cam and grooves.
Guidance on assembling and positioning screws for the cylinder.
Steps for reassembling the interposer assembly with the cylinder cam.
Final step for assembling the cam stop screw for the lock.
Instruction to place the lock assembly onto the stile's lock-in studs for initial mounting.
Details on fixing the lock assembly using specific machine screws for secure mounting.
Steps to unlock the door using the programmed combination code.
Procedure for unlocking the door using a key.
Instructions to disable combination access, requiring key override.
How to engage and disengage the latch holdback feature.
Lists necessary items and conditions for changing the lock combination.
Guidance on how to input the new combination sequence.
Steps to remove the lock assembly to access the combination change sleeve.
Instructions on how to clear previously depressed buttons.
Depressing the desired buttons for the new combination.
Using a screwdriver to set the new combination on the change sleeve.
Steps to confirm and program the new combination into the lock.
Procedure to detach the combination chamber from the lock.
Holding and clearing the chamber using pliers and control shaft rotation.
Locating code gear pockets relative to the shear line for resetting.
Depressing key-stems based on gear pocket position to reset the combination.
Operating the lockout slide and control shaft to prepare for the new combination.
Depressing the key-stems for the desired new combination.
Finalizing the new combination by rotating the control shaft.
Testing the lock functionality after the combination has been reset.
To Next Page