Kaba SIMPLEX 3000 NARROW STILE - Latch Holdback Operation

7
C-4 Latch Holdback
A. Insert cylinder key into cylinder on combination lock side of
the door. Turn the key in a clockwise direction to the stop
position, retracting the latch fully (See Figure 3-6). Hold the
key in that position and turn the thumb turn to the left
(counterclockwise). Bring the key to the pull position and
remove.
B. To allow the latch to return to lock mode, reinsert and turn
the key to the left (counterclockwise) to the stop position
(See Figure 3-7). Return the key to the pull position and
remove (See Figure 3-8).
F
igure 3-6
Figure 3-7
Figure 3-8