Need help?Do you have a question about the Kaba SIMPLEX 7108 Series and is the answer not in the manual?
General| Door Thickness | 1-3/8" to 2-1/4" (35 mm to 57 mm) |
|---|---|
| Battery Life | N/A (Mechanical Lock) |
| Backset | 2-3/4" |
| Number of Codes | 1 |
| Handing | Non-handed |
| Keypad Buttons | 5 |
Ensure all necessary components are included before starting installation.
Identify the door's swing direction and hinge side for correct lock installation.
Specify the optimal position for the exterior thumbturn hole on the door.
Use the template to accurately mark hole positions for the lockset.
Drill the necessary holes in the door according to template markings.
Create the mortise for the bolt face plate to sit flush with the door edge.
Insert and secure the bolt mechanism into the prepared door holes.
Adjust tailpieces for correct fit based on door thickness.
Mount the exterior and interior lock assemblies to the door.
Verify the lock functions correctly using the factory preset combination.
Prepare the door frame and install the strike plate for bolt engagement.
Change the default lock code to a custom user code.
Guide on how to reset the lock if the combination is lost.
Solutions for common lock operational issues and errors.
To Next Page