Need help?Do you have a question about the Kaba ILCO Generation E-760 Series and is the answer not in the manual?
General| Power Supply | 4 AA Batteries |
|---|---|
| Backset | 2-3/4" (70 mm) |
| Voltage | 6V DC |
| Type | Electronic Access Control Lock |
| Material | Metal |
| Mortise Cylinder | Optional, depends on the specific model |
| Key Override | Optional, depends on the specific model |
| Certifications | ANSI/BHMA A156.25 |
| Locking Direction | Reversible |
| Mounting | Mortise |
| Compatibility | Standard door hardware |
Highlights essential pre-installation checks and safety advice, including the use of safety glasses.
Guidance on inserting the battery holder and securing it, with notes on troubleshooting and environmental conditions.
Details testing the lock's response to various keycards, including Test, Grand Master, and Emergency keycards.
Explains how to transfer security information from existing locks and set up new lock addresses for retrofitted doors.
Describes how to open the lock using the Front Desk Unit (FDU) when the card reader fails, detailing security levels.
Provides a step-by-step guide on using the FDU to activate the electronic override function on the lock.
Explains the use of three different keys for the recodable cylinder, their order of use, and cancellation functions.
Step-by-step guide to changing the lock combination from key #1 to key #2.
Step-by-step guide to changing the lock combination from key #2 to key #3.
To Next Page