Kaba E-PLEX User Manual

E-PLEX
1
1
/4” MORTISE INSTALLATION INSTRUCTIONS
®

Kaba E-PLEX Specifications

General

Access Control	Keypad
Power Source	Battery
Material	Metal
Key Override	Yes
Weather Resistant	Yes
Audit Trail	Yes
Programming	Via keypad or software
Handing	Reversible
Backset	2-3/4"
Door Thickness	2-1/4"
Battery Life	Up to 2 years
Finish	Varies by model (e.g., Satin Chrome, Brass)

Summary

Mortise Handing and Reversing

Reversible ASM Mortise Handing

Instructions for reversing the mortise handing for the ASM lock.

Door Preparation Steps

Installing Outside Unit Assembly

Insert Spindle into Outside Housing Based on Thickness

Inserting the correct spindle into the outside housing based on door thickness.

Place Outside Housing, Ensure Spindle Engagement

Mounting the outside housing on the door, ensuring proper spindle engagement.

Installing Inside Unit Assembly

Mount Inside Plate Flush and Secure

Mounting the inside plate flush against the door and securing it.

Insert Spindle into Inside Housing

Inserting the correct spindle into the inside housing based on door thickness.

Place Inside Trim Assembly, Ensure Engagement

Mounting the inside trim assembly, ensuring proper spindle engagement.

Select LectroBolt Length Based on Door Thickness

Choosing the correct LectroBolt™ length based on door thickness.

Insert and Partially Tighten LectroBolt

Finish Tightening LectroBolt to Secure Lock

Installing/Removing Outside Lever (Key-In-Lever)

Insert Outside Lever Flush and Secure with Key

Installing/Removing Outside Lever (Interchangeable/Removable Core)

Position Lever Sleeve Tab for Handing

Insert Outside Lever Flush and Secure Lever Catch

Insert and Align Tailpiece with Core

Insert Medeco Tailpiece and Cylinder

Installing Battery Pack and Cover

Install Battery Pack and Cover, Secure with Screws

Installing the battery pack and cover, securing with screws.

Replace Batteries with New AA Batteries

Replacing depleted batteries with new AA batteries.

Reconnect Battery Cable and Secure Back Cover

Testing Lock Operation

Test Inside Lever for Latch Retraction

Testing inside lever operation for latch retraction and extension.

Enter Factory Combination to Open Lock

Testing lock opening with the factory default combination.

Test Outside Lever for Latch Retraction

Testing outside lever operation for latch retraction and extension.

Test Key Override Function

Testing key override function for latch retraction and extension.

Test Deadbolt Function and Indicator Lights

Testing the deadbolt function and verifying indicator light flashes.

Programming and Software Settings

Change Master Code for Programming

Changing the master code from default to enable lock programming.

Select 'Entry Lock with Passage' for E3000/E5000

Selecting 'Entry Lock with Passage' for E3000/E5000 series.

Select Lock Type for E3200/E5200 Series

Selecting lock type for E3200/E5200 series using Enterprise Software.