Kaba E-PLEX 30XX SERIES User Manual

OPERATIONS MANUAL
E-PLEX
®
50XX/30XX SERIES

Kaba E-PLEX 30XX SERIES Specifications

General

Brand	Kaba
Model	E-PLEX 30XX SERIES
Category	Door locks
Language	English

Summary

States of the Lock

Factory Mode

Describes the initial state of the E-Plex Lock, requiring the master code for access.

Access Mode

Refers to the lock being operational for user access, not in factory or programming mode.

Pushbutton Programming Mode

Mode for programming operations, entered via master or manager combinations.

Sequence of Operations for Start-Up Programming

Recommended sequence of operations

Outlines the initial steps for programming the E-Plex Lock from factory mode.

Default Values of E-Plex Lock Programmable Parameters

Configuring the Lock

General Procedure for Pushbutton Programming

Provides general steps for programming the E-Plex Lock using the pushbutton interface.

Reset Procedures

Procedure 1 - Program the Access Code Length

Procedure 2 - Modify the Master User Access Code

Procedure 3 - Set the Date / Time

Procedure 4 - Program the Lock ID and Unlock Time

Procedure 5 - Program the Duration of the Passage Mode Period

Procedure 6 - Program the Lock for Tamper Time Parameters

Procedure 7 - Programming the Lock for Keypad Buzzer Volume

User - General Information

User Levels

Details the five classifications of users and their operational capabilities on the lock.

User Codes

Explains the process of adding users and the restrictions on user codes.

User Access Codes (PINs) - Examples

Procedure 1 - Add / Modify a User Access Code

Procedure 2 - Add / Modify a Manager Access Code

Procedure 3 - Add / Modify Service User Access Code

Procedure 4 - Delete User Access Codes

Kaba Simplex®/E-Plex® 5x00/3x00 Series Limited Warranty

Registration Card

Procedure 5 - Delete Manager Access Codes

Procedure 6 - Delete Service User Access Codes

Procedure 7 - Delete All Access Codes Except Master, Manager and M-Unit

Procedure 8 - Activate User Access Codes

Procedure 9 - Activate Manager Access Code

Procedure 10 - Activate Service User Access Code

Procedure 11 - Activate All User Access Codes

Procedure 12 - Activate / De-activate Passage Mode

Procedure 13 - De-activate User Access Codes

Procedure 14 - De-activate Manager Access Codes

Procedure 15 - De-activate Service User Access Codes

Procedure 16 - De-activate All Access Codes Except Master, Manager, M-Unit

Procedure 17 - Activate/De-activate Lockout Mode

Procedure 18 - Perform Manual Diagnostics

Battery Life and Replacement

Procedure 19 - Latch Holdback Operation

Procedure 20 - Swingbolt Operation

Summary of Pushbutton Programming Commands

Visual Feedback Message Definitions

User List Table