Need help?Do you have a question about the Kaba Peaks Preferred and is the answer not in the manual?
General| Strike Plate | Included |
|---|---|
| ANSI/BHMA Grade | Grade 1 |
| Type | Mortise |
| Backset | 2-3/4 inches |
| Door Thickness | 1-3/4 inches |
| Handing | Reversible |
| Deadbolt Throw | 1 inch |
| Finish | Multiple options available |
Details the 8401/3401 series mortise cylinders, available lengths, cams, and kits.
Introduces key-in-knob cylinder kits, universal kits, and lists compatible lock types.
Details capped (8800/3800) and spring loaded (8900/6800) SFIC cores.
Describes LFIC cores for Corbin Russwin, Yale, Medeco, Schlage, and Sargent.
Guides on cylinder stamping, proper lubrication, and correct tailpiece insertion.
Details key stops, factory bittings, tolerances, and MACS data.
Explains using various machines (Framon, HPC, ILCO) for cutting keys by code.
Lists patent pins, tumbler pins, and springs used in Peaks systems.
Provides tables for bottom and top pin lengths and stack heights for A2 and A4 systems.
Explains how to calculate pin stacks for A2 systems in SFIC cores.
Explains how to calculate pin stacks for A4 systems in SFIC cores.
Standards for designing top master keys (TMK) and control keys (CTR).
To Next Page