Need help?Do you have a question about the Kaba 7102 series and is the answer not in the manual?
General| Type | Mortise Lock |
|---|---|
| Security Grade | ANSI Grade 1 |
| Durability Grade | ANSI Grade 1 |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" to 2-1/4" (44mm to 57mm) |
| Deadbolt Throw | 1 in. |
| Finish Options | Bright Brass, Satin Chrome |
| Compliance | ANSI/BHMA A156.13 |
| Fire Rating | 3-hour fire rated |
| Anti-Drill Protection | Hardened steel drill-resistant inserts |
| Lock Type | Mortise deadbolt and latch combination |
A list to verify all included components before installation.
Identifies the door handing (left/right, inward/outward) for correct installation.
Specifies where to install the lock on the door for optimal usability.
Guides on marking and drilling necessary holes accurately for lock installation.
Instructions for creating the correct cutout for the bolt faceplate.
Steps for inserting, securing the bolt, and adjusting tailpieces for door thickness.
Mounting the exterior and interior lock assemblies using thru-bolts.
Steps to verify the lock functions correctly after installation.
Details Kaba's warranty policy for the lock product.
Form to register the lock for warranty and future support.
Steps to confirm the combination change mechanism is correctly installed.
How to install the strike plate on the door frame.
Initial steps for changing the lock's combination.
Guide to reset the lock if the combination is lost.
Solutions for common lock operational issues and errors.
To Next Page