Kaba Peaks Preferred

Section 2 - 27
Product Information
6-pin 140
• brass plug
• alloy shell and control sleeve with patented plating and coating
• spring cover retains pins and springs
• 6840-00-3540 staking fixture and 6440-00-4001 staking tool required
• no forbidden or mandatory control combinations
• face of plug is key stop for longer core life
• This product uses a large diameter plug.
J series bottom pins required for A2 system pinning.
K series bottom pins required for A4 system pinning.
Uses:
6340-00-4012 timing pin
6800-00-2007 7-pin small format
interchangeable cores spring cover
6140-00-4002 C-ring plug retainer
Large Format Removable Cores for Sargent—8544/6540 Series
Install timing pin here.
top view of core
Timing pin engages slot
in sleeve to create
positive key pull stop
for control key.
uncombinated: combinated:
8544-xx-1006 8544-xx-1206 140, 6 pin
6540-xx-1006 6540-xx-1206 140, 6 pin
6-pin 140
• brass plug
•
alloy shell and control sleeve with patented plating and coating
• spring cover retains pins and springs
• 6440-00-3540 staking fixture and 6440-00-4001 staking tool required
• pins like original small format interchangeable cores; A2 system stacks to 26
• face of plug is key stop for longer core life
• 6440-00-2000 spring cover
• 6140-00-4002 C-ring plug retainer
uncombinated: combinated:
8444-xx-1006 8444-xx-1206 140, 6 pin
6440-xx-1006 6440-xx-1206 140, 6 pin
NOTE: Dedicated pin kit #6440-00-5002 required: Available for A2 system pinning only.
Uses:
6440-00-2000 spring cover
6140-00-4002 C-ring plug retainer
Large Format Removable Cores for Schlage—8444/6440 Series