Section 3 - 15
Key Cutting & Pinning
Rekeying
Pry off and discard the spring cover. Rekey, lubricate the cylinder with Poxylube
®
, and apply a new spring cover.
Since all Peaks products are designed to be top loaded, use of a follower for rekeying is optional.
Mortise/rim cylinder screws have a Loctite
®
coating. If cams or plug retainers are removed, use new screws and
t
ighten them firmly.
The 8400/3400-xx-1006 kit security bushing
To prevent tailpiece detachment in certain locksets, the 3400-00-2009 security bushing must be applied to some
8400/3400 series key-in-knob cylinders. See Section 2 of this Manual for cylinder details.
To Next Page
Loading...
