Operating Manual BRAVO II
1
BRAVO FEATURES
• Professional key cutting machine for automobile, household cylinder keys and cruciform keys.
• Micrometer adjustment for the tracer.
• Removable chip tray.
• Tynex brush.
• Carriage operates on twin rods with sealed bushings.
• Carriage is automatically released once the gauges are disengaged.
• Carriage locks in down position.
• Machined jaws give excellent grip with minimal pressure.
TECHNICAL DATA
MOTOR: single phase 110V-60Hz
CUTTER: High speed steel dia. 3.15” x 0.197” x 0.63” (80 mm x 5 mm x 16 mm)
MOVEMENT: on bearings. Self cleaning synthetic bushings.
JAWS: four side, revolving.
SAFETY DEVICE: carriage is released only when the gauges are out of safety position.
MAX. CUT. LGTH.: 2.09”
DIMENSIONS: length 18.11”, width 14.96”, height 9.65”
WEIGHT: 39.7 lbs.
ACCESSORIES
Pair of ø 0.047” steel pins
Code D401224ZZ (each)
Pair of setting blanks
for calibrating
Code D401561BA (each)
Pair of steel tip stops
with neck
Code D402301BA (each)
Pair of ø 0.066”
steel pins
Code D401225ZZ (each)
Locking bar for
cutter removal
Code D400754BA
Set of allen keys (6 pcs.)
2mm, 2.5mm
3mm, 4mm, 5mm, 6mm
Wrench 19mm
Code D300783ZZ
Pair of steel tip stops
Code D402302BA (each)
To Next Page
Loading...