Kaco blueplanet 25.0 NX3 M3 User Manual

KACO blueplanet 3.0 NX3 M2 - KACO blueplanet 20.0 NX3 M2 + KACO blueplanet 25.0 NX3 M3 - KACO blueplanet 33.0 NX3 M3 Page 6
2.1.2 Connect Wi-Fi stick through the router
If had configurated the WLAN network to the Wi-Fi stick and the blue LED light of the Wi-Fi stick works, you need to
connect your smart phone to the router.
 Connect Wi-Fi stick through the router.
1 Open the phone Wi-Fi settings page, and manually connect to the router.
2 Come back to the app and click on “LOCAL MODE” to choose the Wi-Fi stick.
» Proceed with inverter parameter setting.
Fig. 12: Connect to Wi-Fi stick
NOTE
Can’t find the smart Wi-Fi dongle in your WLAN list?
Sometimes you can’t find the smart Wi-Fi dongle in your WLAN list:
› Sometimes you can’t find the smart Wi-Fi dongle in your WLAN list. You need to check the network of
your phone is the same as that of Wi-Fi stick, and click the “Scan device” button again, wait for the
scan results to be shown in the list with Wi-Fi stick’ serial number and ip address. If you haven’t found
the smart Wi-Fi stick in list after multiple attempts, you can close the router to connect to Wi-Fi stick
directly through the Wi-Fi stick's hotspot.

Kaco blueplanet 25.0 NX3 M3 Specifications

General

Brand	Kaco
Model	blueplanet 25.0 NX3 M3
Category	Inverter
Language	English