CAUTION
Property damage as a result of condensation
During pre-assembly of the devices, moisture can penetrate into the interior via the DC plug connectors and the dust-pro-
tected threaded connections. The resulting condensate can cause damage to the device during installation and start-up.
ü Keep the device closed during pre-assembly and do not open the connection area until you perform installation.
1. Seal off any plug-in connections and screw fittings using sealing covers.
2. Prior to installation, check the inner area for condensation and if necessary, allow it to dry sufficiently before installa-
tion.
3. Immediately remove any moisture from the housing.
6 | Assembly and preparation Manual
KACO blueplanet 3.0 TL3 KACO blueplanet 4.0 TL3 KACO blueplanet 5.0 TL3 KACO blueplanet 6.5 TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6 TL3 KACO blueplanet 9.0 TL3 KACO blueplanet 10.0 TL3
Page 20
EN
To Next Page
Loading...
