Kaco blueplanet 3.0 TL3 M2 WM OD IIG0 - 12.6 Storing the device

1. If possible, always pack the device in the original packaging. If this is no longer available, an alternative is to
use equivalent packaging.
2. You must be able to close the box completely and it must be able to accommodate the weight and size of
the device.
12.6 Storing the device
NOTE
Property damage as a result of condensation
Faulty storage can form condensate in the device and impair the device functioning (e.g. storage outside the
ambient conditions or temporary relocation from a cold to a hot environment).
1. Prior to installation, check the inner area for condensation and if necessary, allow it to dry sufficiently be-
fore installation.
2. Store in accordance with the technical data > [See section4.3}Page14]
↻ Device packaged.
F Store the device at a dry location, in accordance with the ambient temperature range [See section4.3}Page14].
Manual Decommissioning and dismantling | 12
KACO blueplanet 3.0 TL3 KACO blueplanet 4.0 TL3 KACO blueplanet 5.0 TL3 KACO blueplanet 6.5 TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6 TL3 KACO blueplanet 9.0 TL3 KACO blueplanet 10.0 TL3
Page 89
EN