2 Technical Specifications
2.1 Nameplate
The machine's nameplate provides the model designation and important technical information.
The nameplate is located on the outside of the machine:
■ above the cooler,
or
■ on the rear of the machine.
➤ Enter here the nameplate data as a reference:
Feature Value
Rotary Screw Compressor
Part No.
Serial No.
Year of manufacture
Rated power
Rated motor speed
Maximum working pressure
Ambient temperature
Tab. 3 Nameplate
2.2 Options
The table contains a list of possible options.
➤ Enter options here as a reference.
Option Option code Exists?
Modulating control C1
Adjustable machine feet H1
Air cooling K1
Transformer power supply for refrigeration dryer T2
Refrigeration dryer T3
Prepared for heat recovery W1
Tab. 4 Options
2.3 Weight
The weight given is the maximum. Actual weights of individual machines are dependent on equip‐
ment fitted.
2 Technical Specifications
2.1 Nameplate
4
Service Manual Screw Compressor
ASK T SIGMA CONTROL BASIC 9_5717 20 E
To Next Page
Loading...
