Kaiser Baas GAMMA - Take-Off and Landing Basics

EN
GAMMA DRONE | User Guide
19
TAKE-OFF AND LANDING BASICS
To Take-O you must first bind the Drone to your Transmitter.
Refer to the Drone/Transmitter Binding Section.
The Gamma Drone comes equipped with a Take-O and Landing function.
To Take-O:
Press the Take-O/Landing Button to arm the Drone. The Rotor Blades will start to spin
indicating it is ready to fly. Push the Throttle/Yaw Left Stick slightly UP to fly.
The Gamma Drone features Auto-Hover, releasing the Throttle/Yaw stick will keep the
drone at the same altitude. Pushing the Throttle/Yaw Left Stick UP or DOWN will ascend
or descend the Drone respectively.
To Land:
Whilst the Drone is in flight press the Take-O/Landing button. The Drone will then
descend to the same altitude/level from which you armed it.
To Emergency Stop:
In an emergency in which you need to stop the Drone motors immediately, HOLD the
Take-O/Landing Button for 3 seconds to kill the motors completely.