mini PhotoScanner
User Manual mini PhotoScanner
LED light status
Green on – The scanner is ready to use
Green blinks continuously – Initialising system and memory card/
USB memory stick / Busy scanning and
storing images / Sensor cleaning in progress
Two blinks – Paper jam. Press the power button for 0.5
seconds, the scanner will back out the
photo/document so you can remove from
the output slot
Three blinks – Memory card error. Remove the memory
card to clear the error status
Four blinks – Calibration failed
Five blinks – Scan To PC failed. The PC may be busy
or unavailable
No light – The scanner is turned off or there is
no power
pg7
To Next Page
Loading...
Need help?
General
