Power On/Off
To power ON your camera
1. Insert the battery into the camera.
2. Hold the power/toggle button for 2 seconds until you see the Kaiser Baas
logo appear.
Navigation
Navigate the menus and camera modes using the 4 buttons found on your camera.
The front Power/Toggle button cycles through the cameras modes and settings. It
can also be used to go back/cancel any menu item.
The top Record/Confirm button will start/stop recording video, capture photos and
confirm/select menu items.
The +/- buttons will scroll up/down in the settings page. They will also ZOOM in/out
when in Video/Photo mode.
To Next Page
Loading...
