Kaiser Baas X250 - Photo Mode; Photo Settings and Resolution; Time Lapse Photo; Self Timer and Burst Photo

PHOTO MODE PHOTO MODE
09 - ENG 10 - ENG
To enter Photo Mode, click the Power/Mode
button once on the top of the camera.
Click the Record/Conrm button to take a
photo.
Photo Settings
Image Resolution
Resolution refers to the number of pixels in an
image. Resolution is sometimes identied by
the width and height of the image as well as
the total number of pixels in the image.
See the table for the X250 image resolution
options.
Time lapse Photo
Time lapse Photo mode allows you to shoot a
continuous sequence of photos. This mode is
activated by clicking the Record/Conrm button
and will shoot automatically until stopped by
pressing the Record/Conrm button again.
Shoot in this mode with the following intervals
3/5/10/30/60 seconds.
Self Timer
When this mode is enabled, it lets you set the
delay for when a single photo is taken after
clicking the Record/Conrm button.
3/5/10/20 second intervals are available.
Burst Photo
Photo burst lets you capture photos in a rapid
fast ring sequence.
You can select to take either 3 or 5 photos
per burst.
MP Resolution
12 4320 x 3240
10 3648 x 2736
8 3264 x 2448
5 2592 x 1944
3 2048 x 1536
2 1600 x 1200