Kaiweets KM601s - Starting Measurement; Measurement Warnings and SMART Mode

Warning
1. Do not measure voltages higher than DG1000V or AC750V, which can damage the meter
2. Pay attention to safety when measuring high voltage to avoid electric shock or personal injury
3. Before use, test the known voltage or current with the meter to make sure the meter is in good
function
SMART (AUTO) Measurement Mode
The Meter defaults to SMART mode. In the SMART mode, the meter can test DC voltage, AC
voltage, resistance, continuity, it selects the range with the best resolution automatically.
Turn on & Ready to use
1. Long press the (/) button for about 2 seconds to turn on the meter, ‘Auka’ will be displayed
on the screen, and the pointer will swing by itself, indicating the SMART mode.
2. Insert the red probe into ‘INPUT’ jack and the black probe into the ‘COM’ jack.
3. Make the red test lead and the black test lead touch each other to check whether they are
normal. The buzzer will beep and the indicator light will be on if normal. Use the continuity function
as a fast, convenient method to check for opens and shorts.
9