Kaiweets KM601s - Page 20

indicating DC current measurement.
2. Press the ‘(5] button, ‘mA’ signal and ‘AC’ signal will be displayed on the screen, indicating
of AC current measurement.
NOTE:
1. When measuring AC current, the frequency will be displayed, and when measuring DC current,
the ambient temperature will be displayed on the screen.
2. ‘LEAD’ signal will be displayed on the screen and the indicator light will turn red when the test
leads are connected incorrectly, please insert the red test lead into ‘mA’ jack.
3. The meter will turn on the current testing function when you insert red test lead into ‘mA"’ jack
and black test lead into ‘COM’ jack in any mode. For safety, users cannot press the ‘e’ button
to switch the functions.
4. The meter will beep regularly to remind users to use the current testing function correctly. Do
not measure current > 630mA in this gear, in case of the mA fuse burnt.
19