Kaiweets ST600X - Symbol Meanings

Symbol Description
=
Damaged Fuse
fthe fuse is bumt out, the symbol ' £=F * will be displayed. In current test,
the symbol * FUSE will also be displayed. The current can only be
measured after replacing the good fuse.
0}
Auto Power Off
The Auto Power Off function by default at boot and * (% ' symbol will be
displayed.
Without any operation in about 15 minutes, the Meter will automatically turmn
off. 1 minute before turn off, there will be 5 beeps.
Press and hold both * L% *and*
power off function will be canceled. The '€%" symbol is not displayed.
' buttons to turn on meter, the auto
(223
Jack Indication
When switching to other functions the light above the corresponding jack will
flash for users to insert the right test leads to the right jack