What to do if I suspect an air leak in my Kampa Camping Equipment?
If you suspect an air leak in your Kampa Camping Equipment, first, ensure that the inflation valve is properly screwed in and that the black ‘O’ ring seal is in place. Also, check that the top cap on the inflation valve is tightly secured.
Why is it difficult to pump up my Kampa Camping Equipment awning?
If you're having difficulty pumping up your Kampa Camping Equipment awning, it might be due to the inflation valve not being fully screwed into the AirPole. Another potential issue is that the AirPole is twisted at the valve; if you hear a noise, stop inflating and untwist the AirPole.
General| Brand | Kampa |
|---|---|
| Model | Travel Pod Cross AIR |
| Category | Accessories |
| Language | English |
Connecting the pump and inflating each AirPole to the correct pressure.
Warning against opening AirPole sleeves while inflated to prevent bladder bursting.
Solutions for issues when inflating the awning, e.g., valve problems.
Checks for potential air leaks, focusing on valve connections.
Addressing potential leaks at seams and the use of seam sealant.
To Next Page
