Do you have a question about the Kampa Travel Pod Maxi AIR and is the answer not in the manual?
Brand | Kampa |
---|---|
Model | Travel Pod Maxi AIR |
Category | Accessories |
Language | English |
Welcome message and recommendation for awning insurance against damage.
Explanation of internal condensation and how to differentiate it from leaks.
Advice on treating seams with sealant for preventing leakage.
Awning designed for light/moderate weather and touring use.
Attaching the tunnel via Keder beading to vehicle gutters.
Alternative attachment using lines/ropes over the vehicle.
Securing awning using velcro straps on roof bars.
Optional pole and clamp fixing for vehicle gutters.
Sliding Keder beading into roll out awning channels.
Unpacking, laying out, and initial corner pegging of the awning.
Connecting the roof fly and tunnel to the vehicle.
Important notes on valve checks and warnings about pole bursting.
Inflating AirPoles to 7 psi using the pump.
Adjusting poles for correct shape and ensuring tension.
Checking and re-pegging corners for a taught awning.
Suspending the inner tent and attaching the groundsheet.
Pegging and adjusting guy lines for stability.
Advice on using pegs and driving them at a 45° angle.
Managing slight leakage and applying seam sealant.
Effect of sunlight on fabric and warranty limitations.
Improving condensation by ensuring ventilation.
Warning against cooking or using naked flames inside the awning.
Step-by-step instructions for deflating and packing the awning.
Advice on storing the awning dry and cleaning with water and brush.
Instructions for caring for zips and recommended spares.
Solutions for issues with pumping up the awning.
Checks for air leaks at the valve and seals.
Distinguishing leaks from condensation and fabric hydrostatic head.
Steps for finding and repairing a puncture in an AirPole.
Procedure for removing, repairing/replacing, and re-inserting an AirPole.
Description of the optional Windbreak for privacy and wind protection.