V. Product Installation
1. Take the device to the location where it needs to be installed, open the
APP to see if the monitoring picture is smooth. If it is, go to the next step.
2. Install the device at a height of 2-3 meters above the ground (the
installation position should not be at a 90° angle with the road ahead) so
as to maximize the effectiveness of the infrared sensor.
TIPS:
If a moving object approaches the Pir sensor vertically, the camera may
not be able to detect its motion.
PIR shall not be placed against the sun and with alternating cold and
hot airflow, such as windows, air outlets and ventilation ducts, which
may cause misreport.
Keep the camera at least 1m away from any wireless device to avoid
wireless interference.
To Next Page
Loading...