EasyManua.ls Logo

Kanto YU5 - Introduction; Whats in the Box

Kanto YU5
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Supporting your digital lifestyle
Introduction
Thank you for choosing YU5 Powered Speakers, designed by Kanto in Canada. YU5 outputs 40W
RMS per channel into 4 Ohm speakers, for remarkably bold and clean sound. Excellent sensitivity
and frequency response provide deep thumping lows and clear, scintillating highs. YU5 is an
amazingly flexible speaker system that can accept five input sources and connect to a subwoofer
for enhanced low frequency effects (LFE). Additionally, it is equipped with the latest Bluetooth
technology and a USB port for charging USB devices. YU5 operates on a multi-voltage power
source from 110 V to 240 V and can be used worldwide.
We recommend you read all instructions carefully before using the system and keep them for
future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or use of
this product.
This powered speaker system was carefully tested and inspected during production, and before
packaging and shipping. After unpacking, please check for any damage. It is rare that a unit is
damaged during shipping, but if this happens contact your retailer immediately. You can also
call Kanto directly at 1-888-848-2643 or email support@kantoaudio.com.
What’s In the Box?
YU5 Active
Speaker
(Left Channel)
YU5 Passive
Speaker
(Right Speaker)
Power
Cord
User
Manuals
x3
x8
Self-Adhesive
Rubber Feet
3.5 mm cable
AUX (10’)
Speaker
Wire (10’)
AUX
RCA
OPT2OPT1
BALANCE
TREBLEBASS
YU5
Remote
x2
‘AAA
Batteries

Related product manuals