KSTB2020
User Guide
13
Connect Automatically Using WPS
Navigate to the Android main menu by pressing the following key sequences:
Home —> Settings —> Network —> Wi-Fi —> Select to enable.
Once Wi-Fi has been enabled, using the remote scroll down and select
“Connect via WPS”.
Once selected press the WPS button on your home router. The Set-Top Box will
automatically connect to the Wi-Fi network.
Ensure that Wi-Fi network signal strength is strong or very strong .
Connect Manually
Navigate to the Android main menu by pressing the following key sequences:
Home —> Settings —> Network —> Wi-Fi —> Select to enable.
Once Wi-Fi has been enabled, using the remote scroll down and select the
required network and press OK. When prompted, enter your Wi-Fi password
using the remote. Alternately a USB keyboard may be plugged into the USB
port of the Set-Top Box. Type password on keyboard as required.
Ensure that Wi-Fi network signal strength is strong or very strong .
Wi-Fi Network Connection
To Next Page
Loading...
Need help?
General
